Beginner hub
Start Here: Learn to Weld
You don't need a trade background to learn to weld, but you do need the right order: understand the processes, pick a suitable machine, protect yourself, then practise on simple projects. This page lays that path out.
The nine-step beginner path
Read these in order. Each one answers the question most beginners have at that stage, and links to the tools and buying guides that go with it.
- What Is Welding?How metal is joined and what the main processes have in common.
- MIG vs TIG vs StickCompare the processes and pick the one to learn first.
- What Welder Should a Beginner Buy?Match a first machine to your power supply, material and budget.
- Welding Safety BasicsThe real hazards and the controls that deal with each one.
- Welding PPE ChecklistWhat to wear, head to toe, before you strike an arc.
- How to Set Up a Home Welding AreaLayout, ventilation, power and fire prevention for a garage or driveway.
- 120V vs 240V WeldersWhat each supply can realistically weld, and what to ask an electrician.
- Beginner Welding ProjectsUseful first builds that practise the core skills.
- Common Beginner MistakesThe errors that cause most bad first welds, and how to fix them.
Not sure which welder to buy?
Most beginners welding mild steel at home start with a wire-feed machine: MIG if you will work indoors and want cleaner welds, flux-core if you want the lowest starting cost or need to work outside. The right answer depends on your power supply, the thickness of the material and where you will weld. The Welder Finder Quiz narrows it down in about two minutes, and What Welder Should a Beginner Buy? explains the reasoning.
Buy protective gear before you strike an arc
Budget for protection at the same time as the machine. At a minimum you need a welding helmet with the correct shade, safety glasses, welding gloves, flame-resistant clothing and leather boots, plus ventilation and a fire extinguisher within reach.
- Welding PPE checklist: what to wear and why
- Welding helmet buying guide
- Welding glove buying guide
- Complete welding safety gear guide
Learn one process properly
Pick one process and stay with it until your beads are consistent. Switching between processes early slows progress, because each has its own technique.
- MIG Welding: Wire-fed and gas-shielded. The quickest process to learn for clean welds on mild steel indoors.
- TIG Welding: Slow and precise. The choice for thin material, stainless and aluminum when appearance matters.
- Stick Welding: Simple, rugged and wind-tolerant. Suited to thicker steel, repairs and outdoor work.
- Flux-Core Welding: Wire-fed without a gas bottle. A low-cost way to start and a practical option outdoors.
Get help from a person, too
Written guides are a starting point. A community-college class, a maker space or an experienced welder watching you work will correct habits a guide cannot see. For anything structural, pressure-containing or safety-critical, use qualified procedures and qualified people.
Free tools