Topic hub
Welding Processes Explained
The four arc-welding processes used in home and hobby workshops, what each one is good at, and where to start learning it.
MIG Welding
Wire-fed and gas-shielded. The quickest process to learn for clean welds on mild steel indoors.
TIG Welding
Slow and precise. The choice for thin material, stainless and aluminum when appearance matters.
Stick Welding
Simple, rugged and wind-tolerant. Suited to thicker steel, repairs and outdoor work.
Flux-Core Welding
Wire-fed without a gas bottle. A low-cost way to start and a practical option outdoors.
How the processes compare
All four use an electric arc to melt the base metal and a filler metal into one pool. They differ in how the filler is fed and how the molten weld is protected from the air, and those two differences decide how easy each is to learn and where it works best.
| Process | Ease of learning | Best for | Shielding | Outdoors |
|---|---|---|---|---|
| MIG (GMAW) | Easiest for clean welds | Mild steel sheet to medium plate, indoor fabrication | Gas from a cylinder | Poor in wind |
| Flux-core (FCAW-S) | Easy | Thicker or less-clean steel, repairs, low starting cost | Flux inside the wire | Good |
| Stick (SMAW) | Moderate | Thick steel, rusty or painted material, field repair | Flux coating on the rod | Very good |
| TIG (GTAW) | Hardest | Thin material, stainless, aluminum, visible welds | Argon from a cylinder | Poor in wind |
For a fuller comparison, including which to learn first, read MIG vs TIG vs Stick. If you are choosing between the two wire-feed options, see MIG vs Flux-Core.
Other processes worth knowing
Oxy-fuel welding and cutting
A flame from oxygen and a fuel gas, usually acetylene, heats the metal instead of an electric arc. It is slower than arc welding for joining steel but remains useful for cutting, heating, bending and brazing. It needs its own safety training because of the fuel gas.
Plasma cutting
A plasma cutter uses an electric arc and compressed air to cut conductive metal quickly and cleanly. It does not join metal, but it is a common companion to a welder once projects involve cutting plate or sheet to shape.
Guides by material and cutting process
Each of these hubs collects the guides, equipment and tools for one material or cutting process.