Skip to main content

Calculator

Duty Cycle Calculator

Check whether your planned weld and cool-down times fit inside your welder's rated duty cycle at a given amperage.

Free to use · No sign-up · Results are educational estimates

WelderGuru is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. Learn more.

Tool · Duty Cycle

Duty Cycle Planner

Understand when your welder needs to cool. Always follow manufacturer duty-cycle specs.

How this tool works

Duty cycle is the share of a ten-minute period a welder can run at a stated amperage before it needs to cool. Enter the rating from your machine’s data plate or manual, then the weld and rest times you plan. The calculator works out your actual duty percentage and tells you whether it sits inside the rating.

Know the limits

Ratings are set at a specific amperage and ambient temperature. A machine run hotter, in a warm garage or with restricted airflow will reach its limit sooner. Always use the manufacturer’s published figures.

More tools

All tools & calculators