Skip to main content

Comparison

Welder Finder: Compare Welder Types

Filter welder types by process, voltage, portability and beginner-friendliness, then compare up to four side by side.

Free to use · No sign-up · Results are educational estimates

WelderGuru is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. Learn more.

Tool · Welder finder

Welder Finder Database

Filter by process, voltage, duty cycle, portability, and project type. Specs are category descriptions, not manufacturer datasheets — always verify on Amazon and the manual.

Beginner Flux-Core Welder

FCAW 120V Light duty 30-140A

Best for: First-time welders, outdoor steel repair, no gas setup

Pros

  • Easiest "no gas" entry point
  • Tolerant of breeze and outdoor work
  • Works with thicker mild steel than basic MIG

Cons

  • More spatter than MIG with gas
  • Slag must be chipped off welds
  • Not ideal for aluminum or thin sheet

PPE, ventilation, and material checks are mandatory. Flux fumes still require breathing protection.

120V MIG Welder

MIG 120V Light duty 30-140A

Best for: Home shop, auto-body sheet metal, light fabrication

Pros

  • Clean welds with shielding gas
  • Beginner-friendly arc start
  • Plug-in to most household 120V circuits

Cons

  • Limited duty cycle vs 240V
  • Needs shielding gas bottle for MIG
  • Thinner-material focus

Verify household circuit, breaker, and outlet match the machine's requirements. No undersized extension cords.

240V MIG Welder

MIG 240V Medium-High duty 30-200A+

Best for: Shop fabrication, thicker steel, longer welds

Pros

  • Higher amperage and duty cycle
  • Thicker material capability
  • Often supports spool gun for aluminum

Cons

  • Needs proper 240V outlet & breaker
  • Heavier and less portable
  • Higher purchase price

Have a qualified electrician verify outlet and circuit. Never wire 240V without proper training and code compliance.

Dual-Voltage MIG Welder

MIG 120V / 240V Medium duty 30-200A

Best for: Mobile work that needs to plug in anywhere

Pros

  • Plug into 120V or 240V
  • Flexible for shop + jobsite
  • Higher amperage on 240V

Cons

  • Adapter cords often required
  • Capability on 120V is limited
  • Heavier than 120V-only units

Always match the included plug/adapter to a qualified-installed outlet. Confirm breaker rating.

AC/DC TIG Welder

TIG 120V / 240V Medium duty 10-200A+

Best for: Precision welds on aluminum, stainless, thin steel, art

Pros

  • Cleanest precision welds
  • AC required for aluminum
  • Fine amperage control with foot pedal

Cons

  • Steeper learning curve
  • Slower than MIG for production
  • Needs argon shielding gas

TIG arc is very bright — verify helmet shade. Argon displaces oxygen; ventilate.

Stick (SMAW) Welder

SMAW 120V / 240V Medium duty 40-200A+

Best for: Outdoor, dirty/rusty steel, farm and structural repair

Pros

  • Works in wind without shielding gas issues
  • Tolerant of imperfect surfaces
  • Simple, rugged machines

Cons

  • Slag chipping required
  • Higher spatter
  • Not ideal for thin sheet

Electrode holder is hot and live — store properly. Always wear gauntlet gloves and FR clothing.

Multi-Process Welder

MIG/TIG/Stick 120V / 240V Medium duty 30-200A+

Best for: One machine for shop + repair + light fabrication

Pros

  • MIG, flux-core, stick and lift-TIG in one
  • Saves space and budget
  • Great for varied projects

Cons

  • Compromises vs specialized machines
  • Process changeover takes setup
  • Aluminum often needs accessory

Re-read settings and shielding gas requirements for each process. Re-verify polarity.

Engine-Driven Welder

Stick / Flux-Core Generator Heavy duty 40-250A+

Best for: Off-grid jobsites, ranch, pipeline repair

Pros

  • No outlet required
  • Powers tools as a generator
  • Built for rugged work

Cons

  • Fuel, oil, and engine maintenance
  • Loud and heavy
  • Exhaust requires outdoor or vented use

Never run an engine welder in enclosed spaces. CO poisoning risk. Keep fuel sources away from sparks.

Spot / Resistance Welder

RSW 120V / 240V Light duty N/A

Best for: Auto body panels, sheet-metal assembly

Pros

  • Fast for sheet-metal lap welds
  • No filler or gas needed
  • Minimal cosmetic mark when set right

Cons

  • Material thickness limits
  • Not for structural or thick steel
  • Limited to specific joint types

Pinch hazards in the arms. Keep fingers clear. Sheet metal heats quickly — gloves still required.

Comparison engine

Build Your Own Welder Comparison

Save up to 4 welder categories and compare process, voltage, duty cycle, and project suitability.

Tap + Compare on any welder card to add it here. Save up to 4.

How this tool works

Each card describes a type of welder: its process, usual input voltage, typical duty-cycle band, what it is good at and where it struggles. Filter the list, then add up to four types to the comparison table. Your comparison list is saved in this browser.

Know the limits

The cards describe categories, not individual products, and the specifications are typical ranges. Confirm the exact figures for any machine on its product listing and in its manual.

More tools

All tools & calculators