Explainer
Welding Process Visualizer
See, in simplified form, how MIG, TIG, stick and flux-core welding each create an arc, add filler metal and shield the weld.
WelderGuru is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. Learn more.
Welding Process Visualizer
Conceptual visualization only. Actual machine setup varies by model and process.
MIG (GMAW)
Wire is continuously fed through the gun while shielding gas protects the weld pool. Beginner-friendly on clean mild steel.
Flux-core (FCAW-S)
Flux inside the wire generates its own shielding gas as it burns. Tolerant outdoors. Slag must be chipped off.
Stick (SMAW)
Coated rod creates its own gas shield as it melts. Rugged for outdoor and dirty steel.
TIG (GTAW)
Non-consumable tungsten electrode arcs to the work; filler is added by hand. Precision, slow, beautiful.
Shielding gas
Argon, CO₂, or Ar/CO₂ blends protect the molten pool from atmospheric oxygen and nitrogen. Wrong gas = porosity and weak welds.
Slag & the heat-affected zone
Flux processes leave a slag crust that must be chipped before the next pass. Heat changes the metal microstructure near the weld — the HAZ.
Click or tap a tab above to switch processes
Conceptual visualization only. Actual machine setup varies by model and process.
How this tool works
Switch between processes to see a simplified picture of where the arc forms, how filler metal reaches the joint and what protects the molten weld from the air.
Know the limits
This is a conceptual diagram for learning the differences. It is not a setup guide; real torch angles, stick-out and settings come from your machine’s manual and practice.