Skip to main content

Topic hub

Welding Processes Explained

The four arc-welding processes used in home and hobby workshops, what each one is good at, and where to start learning it.

How the processes compare

All four use an electric arc to melt the base metal and a filler metal into one pool. They differ in how the filler is fed and how the molten weld is protected from the air, and those two differences decide how easy each is to learn and where it works best.

ProcessEase of learningBest forShieldingOutdoors
MIG (GMAW)Easiest for clean weldsMild steel sheet to medium plate, indoor fabricationGas from a cylinderPoor in wind
Flux-core (FCAW-S)EasyThicker or less-clean steel, repairs, low starting costFlux inside the wireGood
Stick (SMAW)ModerateThick steel, rusty or painted material, field repairFlux coating on the rodVery good
TIG (GTAW)HardestThin material, stainless, aluminum, visible weldsArgon from a cylinderPoor in wind
General characteristics. Individual machines and consumables vary.

For a fuller comparison, including which to learn first, read MIG vs TIG vs Stick. If you are choosing between the two wire-feed options, see MIG vs Flux-Core.

Other processes worth knowing

Oxy-fuel welding and cutting

A flame from oxygen and a fuel gas, usually acetylene, heats the metal instead of an electric arc. It is slower than arc welding for joining steel but remains useful for cutting, heating, bending and brazing. It needs its own safety training because of the fuel gas.

Plasma cutting

A plasma cutter uses an electric arc and compressed air to cut conductive metal quickly and cleanly. It does not join metal, but it is a common companion to a welder once projects involve cutting plate or sheet to shape.

Guides by material and cutting process

Each of these hubs collects the guides, equipment and tools for one material or cutting process.