Calculator
Amperage Calculator
Estimate a starting amperage range from your material, thickness, welding process and joint type, then confirm it against your machine's chart.
WelderGuru is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. Learn more.
Material Thickness & Amperage Guidance
Educational estimate only. Verify final settings using your welder’s chart and manual.
How this tool works
The calculator starts from a typical amperage range for the thickness you choose, then adjusts it for the material and process: aluminum usually needs more current than steel of the same thickness, stainless a little less, TIG slightly less and stick slightly more. It also flags combinations that rarely work well, such as heavy plate on a 120V machine or flux-core on aluminum.
Know the limits
The result is an educational estimate, not a machine setting. Joint design, position, wire or electrode diameter, travel speed and your machine all change the right number. Start at the low end, run a test bead on scrap of the same material, and follow the chart inside your welder and its manual.