Tracker
Welder Maintenance Tracker
Keep a simple log of liners, contact tips, nozzles, cables and clamps so wear parts get replaced before they cause weld problems.
WelderGuru is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. Learn more.
Welder Maintenance Tracker
Stay on top of liners, tips, nozzles, cables, ground clamps, and torch parts. Stored privately in your browser.
| Item | Last done | Notes |
|---|---|---|
| Machine exterior wipe-down | ||
| Wire liner inspection / replace | ||
| Contact tip replacement | ||
| Nozzle cleaned / anti-spatter | ||
| Power cable inspection | ||
| Ground clamp tightness & condition | ||
| Gas hose / regulator inspection | ||
| Fan / vent dust-out | ||
| TIG torch parts (cups, collets, tungsten) | ||
| Stick electrode holder condition | ||
| Last professional service date |
Stored privately in your browser. Continue your setup, your way.
How this tool works
Record when you last replaced or checked each wear item, and add a note. The log is stored in this browser only, so it stays private and works offline.
Know the limits
Service intervals depend on the machine and how hard it works. Follow the maintenance schedule in your welder’s manual, and disconnect power before opening the machine or changing parts.