Skip to main content

Explainer

Welding Process Visualizer

See, in simplified form, how MIG, TIG, stick and flux-core welding each create an arc, add filler metal and shield the weld.

Free to use · No sign-up · Results are educational estimates

WelderGuru is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. Learn more.

Tool · Process visualizer

Welding Process Visualizer

Conceptual visualization only. Actual machine setup varies by model and process.

MIG gun
.030 ER70S-6 wire feed
75/25 Ar/CO₂ shield
Mild steel plate

MIG (GMAW)

Wire is continuously fed through the gun while shielding gas protects the weld pool. Beginner-friendly on clean mild steel.

Flux-core gun
Flux-cored wire (self-shielded)
No external gas
Mild steel plate

Flux-core (FCAW-S)

Flux inside the wire generates its own shielding gas as it burns. Tolerant outdoors. Slag must be chipped off.

Electrode holder
7018 / 6011 rod
Flux coating shield
Steel plate

Stick (SMAW)

Coated rod creates its own gas shield as it melts. Rugged for outdoor and dirty steel.

TIG torch
Tungsten + separate filler rod
100% argon shield
Aluminum / stainless

TIG (GTAW)

Non-consumable tungsten electrode arcs to the work; filler is added by hand. Precision, slow, beautiful.

Shielding gas envelope
Weld pool

Shielding gas

Argon, CO₂, or Ar/CO₂ blends protect the molten pool from atmospheric oxygen and nitrogen. Wrong gas = porosity and weak welds.

Bead + HAZ
Slag layer (flux processes)

Slag & the heat-affected zone

Flux processes leave a slag crust that must be chipped before the next pass. Heat changes the metal microstructure near the weld — the HAZ.

Click or tap a tab above to switch processes

Conceptual visualization only. Actual machine setup varies by model and process.

How this tool works

Switch between processes to see a simplified picture of where the arc forms, how filler metal reaches the joint and what protects the molten weld from the air.

Know the limits

This is a conceptual diagram for learning the differences. It is not a setup guide; real torch angles, stick-out and settings come from your machine’s manual and practice.

More tools

All tools & calculators